This is my finished block (the first).
When I looked at the directions I was confused and had to cut and paste them into a new file for myself to break them down so I could understand them better (I am still a quilter beginner). So, here is my version ... in case anybody has trouble like I had.
“Little Red School Houses” found here
(I think it is a BOM project by AzPatch)
Cut from white-on-white print - - - cut a strip 2 ¾ “ wide
four 2 3/4" x 2 3/4" squares = A
one 2 3/4" x 2 1/2" rectangle = B
- - - cut rest of strip down to 2" BUT... (* since 1 1/2 and 1 1/4 make 2 3/4 you could cut the last 3 at this point)
one 2" x 3 1/2" rectangle, = C
one 2" x 2" square = D
- - - cut rest of strip down to 1 ½ “
two 1 1/2" x 1 3/4" rectangles = E (*)
- - - cut rest of strip down to 1 ¼ “
one 1 1/4" x 9 1/2" rectangle = F (*)
I found it helpful to know which red fabric was used for what part of the house.
From red print one (window side) cut -
one 2" x 2" square = G
two 2" x 4 1/4" rectangles and = H
one 2" x 1 1/4" rectangle = I
From red print two (door side and chimneys) cut -
one 2 3/4" x 5" rectangle = J
two 2" x 4 1/4" rectangles = K
one 2" x 1 1/4" rectangle = L
two 1 3/4" x 1 3/4" squares = M
From red print three (roof) cut -
one 2 3/4" x 5" rectangle = N
one 2 3/4" x 2 3/4" square = O
I hope this is helpful to some other beginner like me!!!
Christa, I think this is VERY helpful. I know you mentioned this blogpost on the blocklotto blog, but would you consider reposting it there to make it easy for everyone to find, especially the less tetchy among us?
ReplyDelete